Mold Inspection in Crestview, Florida
★★★★★“Very professional, knowledgeable, and courteous. 10/10 recommend.”Cris E., Google review of an Alabama inspection · More reviews
AIM EH&S provides independent mold inspection and indoor air quality testing for homes and buildings in Crestview, Baker, Laurel Hill, Holt, Milligan and Blackman, in north Okaloosa County. AIM looks for the moisture behind a problem, takes air and surface samples for an independent laboratory, compares the results with an outdoor sample, and writes a report. AIM tests and documents. It never does remediation, so the findings stay separate from any cleanup work.
Mold assessments in Florida are performed by Lance Bourque, a Florida-licensed mold assessor (DBPR license MRSA5893). You can verify the license at MyFloridaLicense.com.
Florida service is mold and indoor air quality only.
Request an inspection
Every inspection is quoted up front. We’ll call you back same day.
No remediation upsell. Ever.
What AIM’s Alabama Clients Say
These Google reviews come from AIM’s Alabama clients.
“I cannot put into words how helpful AIM was with a last-minute request to take samples at our property. They understood how high of a priority it was to us and made sure that lab results and reports were available to us as quickly as possible.”
“They were very thorough in their inspection and professional. I would recommend them any day and to anyone who is in need of help in this area.”
“Very professional, knowledgeable, and courteous. 10/10 recommend.”
Rated 5.0 on Google. Read all our reviews
Mold and Moisture in Crestview and north Okaloosa County: The Local Picture
Crestview more than doubled since 2000, and half its homes are newer than that
Crestview, the Okaloosa County seat since 1917, counted 14,766 people in the 2000 census, 20,978 in 2010 and 27,134 in 2020, and the University of Florida’s estimate for April 1, 2025 is 31,702. The housing followed. Of 11,554 homes in the Census Bureau’s 2020 to 2024 estimates, 5,884 (51%) were built in 2000 or later, and the median home dates to 2000, against 1990 for Okaloosa County as a whole. New does not mean dry. A modern, tightly built house depends on its air conditioner to pull humidity out, so a weak drainage detail, a missed window flashing or a leaking roof penetration can leave framing wet behind finished walls.
Sources: University of Florida BEBR, Florida Population: Census Summary 2020; BEBR, Florida Estimates of Population 2025; City of Crestview, History; Census Bureau ACS 2024 5-year, Crestview city, table B25034; table B25035, Crestview city; table B25035, Okaloosa County
September 1998: 19.98 inches at the Crestview airport and a record crest on the Shoal River
Hurricane Georges slowed down along the central Gulf Coast in late September 1998, and the National Hurricane Center’s report lists 19.98 inches of rain at the Crestview airport. The Shoal River near Crestview crested at 21.40 feet on September 30, 1998, the highest annual peak in the USGS record, which begins in 1939. Okaloosa County’s flood flyer says high water on the Shoal and Yellow Rivers forced the closing of Highway 85 to the south and Highway 90 to the east and west, and nearly isolated Crestview. Mold needs moisture, so after any flood the useful question is how far the wet materials extend, whether drywall, insulation, flooring or the cavities behind them.
Sources: National Hurricane Center, Hurricane Georges Tropical Cyclone Report, Table 2; USGS annual peak streamflow, site 02369000, Shoal River near Crestview; NWS gauge page, Shoal River near Crestview (CRVF1); Okaloosa County, 2025 Flood Protection Information
Hurricane Sally put 11.52 inches on Crestview in three days, about 18% of a normal year
NOAA’s 1991 to 2020 normals for the Crestview Bob Sikes Airport station put a typical year at 63.60 inches of rain, with July the wettest month at 7.92 inches. NWS Mobile’s Sally summary lists 11.52 inches at the same airport between September 14 and 17, 2020. The Shoal River near Crestview crested at 16.61 feet on September 17, 2020, the second highest crest in USGS records since 1939 and above the 15 feet NWS now classes as major flooding. The Blackwater River near Baker reached 24.55 feet, above its 24 foot major level. After days of rain, saturated ground presses against slabs and foundations, roofs and flashings stay loaded, and wet materials dry slowly.
Sources: NOAA NCEI, U.S. Climate Normals 1991 to 2020, Crestview Bob Sikes AP (USW00013884), annual and seasonal; NCEI monthly normals, same station; NWS Mobile, Hurricane Sally, September 2020; USGS annual peaks, Shoal River near Crestview; USGS annual peaks, Blackwater River near Baker; NWS gauge page, Blackwater River near Baker (BAKF1)
Duke Field, Eglin and a household base that keeps turning over
Duke Field, about 12 miles north of Eglin’s East Gate on Highway 85, is home to the Air Force Reserve’s 919th Special Operations Wing, with about 1,300 part-time reservists plus more than 280 full-time air reserve technicians. A Florida Defense Support Commission study put the 2022 economic impact of Eglin, Hurlburt Field and Duke Field in Okaloosa County at 5.4 billion dollars. The Census Bureau estimates 1,737 Crestview residents age 16 and older serve in the Armed Forces, 22% of civilian adults are veterans, and 3,368 of 10,893 households (31%) moved in during 2020 or later, about half of the renter households. A house closed up for a deployment, or bought by someone arriving on orders, is a good reason to document its condition at the start.
Sources: Eglin AFB, history and auxiliary fields; Air Force Reserve Command, 919th Special Operations Wing fact sheet; Census Bureau ACS 2024 5-year, Crestview city, table B23025; table B21001; table B25038
A renter city beside a small-town edge where about a third of the homes are mobile homes
In Crestview, 4,221 of 10,893 occupied homes (39%) are rented, against 32% for Okaloosa County, and the Census Bureau estimates no seasonal-use homes in the city, while 8.4% of the county’s homes are held that way. Laurel Hill is much smaller: an estimated 237 homes with a median build year of 1984, 88% owner occupied, and roughly a third (about 87) mobile homes, a figure with a wide margin of error. The University of Florida counts its population rising from 584 in 2020 to 746 in 2025. Year-round occupancy means moisture is made indoors every day. Manufactured homes carry ducts and plumbing under the floor, where a small leak can go unseen.
Sources: Census Bureau ACS 2024 5-year, Crestview city, tables B25003, B25004 and B25024; Laurel Hill city, B25024; Okaloosa County, B25004; BEBR, Florida Estimates of Population 2025
Two flood-map offices: Crestview city and Okaloosa County
FEMA’s Community Status Book lists Okaloosa County (community 120173) and the City of Crestview (120597) in the flood insurance program, both with a current effective map date of March 9, 2021, and it tells Crestview users to read the county’s map. The city’s rules are Section 5.05.00 of its Land Development Code. The county’s Growth Management office at 812 East James Lee Boulevard serves unincorporated areas, keeps elevation certificates at 402 Brookmeade Drive, and the county flyer notes that repairs costing 50% or more of a building’s market value must meet new-construction standards. A certificate shows where the floor sits against flood levels, while a moisture survey shows what is wet now.
Sources: FEMA, Community Status Book, Florida; City of Crestview, Land Development Code, Section 5.05.00; Okaloosa County Growth Management, information and FAQ; Okaloosa County, 2025 Flood Protection Information
Our Crestview Mold Inspection Services
We take samples when the results will answer a real question, not by default. Every inspection is built around finding the moisture source, not just swabbing a wall:
- Visual and building envelope inspection: roof, windows, plumbing, crawlspace, and attic.
- Moisture mapping and thermal imaging to locate hidden water behind finishes.
- Air sampling (spore trap): indoor readings compared against an outdoor control and analyzed by an independent, AIHA-accredited lab.
- Surface sampling (swab or tape lift) to confirm what is growing and where.
- HVAC investigation, a common path for spores to spread through a building.
- Post-remediation verification (clearance): independent confirmation that a cleanup actually worked.
What’s Included in a Full Mold Inspection
Every full inspection covers the same ground, in the same order, so nothing gets skipped. Here is everything we check.
Before the visit
A short intake on leaks, odors, past repairs and health concerns, so we know where to look first.
Outside
Roof line, gutters and downspouts as safely visible; grading and drainage, siding, foundation, windows and doors; and where the AC condensate line drains.
Every room inside
Walls, ceilings, floors, baseboards, windows and closets; under sinks and around tubs, showers and toilets; the kitchen, laundry, water heater and garage.
HVAC system
The air handler and its closet, drain pan, condensate line and filter; supply and return registers and visible ductwork, without taking anything apart.
Attic and crawlspace
Accessible attic areas: the underside of the roof deck, insulation, ventilation and bath fan exhausts. The crawlspace too, if the home has one and it is safe to enter.
Measurements
Moisture meter readings on walls, floors, ceilings and cabinets; a thermal imaging camera to spot the temperature patterns that point to hidden moisture; temperature and relative humidity indoors and out.
Findings
Each area rated Condition 1, 2 or 3 on the ANSI/IICRC S520 scale, the likely moisture sources identified, and photos of every finding.
Your report
A written report, room by room, with photos, readings and thermal images. Clear recommendations, including whether samples would answer a real question. And we answer your questions about it.
We take samples when the results answer a real question: spore trap air and surface samples, analyzed by an independent, AIHA-accredited lab. AIM never remediates, so our findings stay independent. Every inspection is quoted up front.
Been quoted for fogging, an ozone machine or a spray-and-go treatment? Read why mold shortcuts don’t fix mold before you sign.
Already Have a Quote or a Lab Report?
Not ready for an inspection, but unsure about a remediation estimate or a lab result? Send it to us. In 2 business days you get a plain written review from AIM, which does not sell remediation. It is a document review, not an inspection.
Get a second opinion on a quote
Who This Is For in Crestview
- Households on military orders, whether buying or renting near Eglin and Duke Field, who want the condition of a Crestview house documented before they commit or when they hand it back.
- Owners of newer Crestview homes, about half of the city’s housing, who want to know why a house that is just a few years old has a musty room or a recurring stain.
- Owners in Baker, Holt, Milligan, Blackman and Laurel Hill, including manufactured homes, and owners near the Shoal, Yellow and Blackwater Rivers after a period of high water.
- Landlords and property managers with Crestview rentals, where roughly 4 in 10 occupied homes are rented and about half of those households moved in during 2020 or later.
- Buyers, sellers and the agents and attorneys who advise them, who need a written record of moisture conditions on a given day.
From AIM’s Alabama Inspections
Real photos from AIM’s inspections in Alabama. No stock images.




Why Independence Matters Here
After a storm or a leak, most of the attention goes to cleanup. Ours is a different job. AIM does not perform remediation anywhere and takes no referral fees from companies that do, so our report reads the same whether the job turns out big or small. Florida law also bars a mold assessor from paying or accepting referral compensation to or from a mold remediator (Fla. Stat. 468.8419), and AIM takes none. No remediation upsell. Ever.
A Report You Can Actually Use
Our reports are written to hold up with a homeowner, an insurer, an attorney, or a buyer. You get the moisture findings, lab results read against an outdoor control, clear photographs, and condition ratings on the ANSI/IICRC S520 scale. No buzzwords, no scare tactics. Precision over promises.
When a mold or water intrusion problem is headed toward a claim, a dispute, or a courtroom, the documentation has to survive someone trying to pull it apart. See our mold & water intrusion litigation support.
Who Performs a Florida Inspection
Mold assessments in Florida are performed by Lance Bourque, a Florida-licensed mold assessor (DBPR license MRSA5893). You can verify the license at MyFloridaLicense.com.
When to Call Us
- You see visible mold or smell a persistent musty odor.
- You have had a roof leak, plumbing leak, flood, or storm intrusion.
- Someone in the building has unexplained respiratory or allergy symptoms.
- You are buying, selling, or leasing and need the building documented.
- A remediation was done and you want independent clearance before closing the file.
Crestview Mold Inspection FAQs
What does a mold inspection in Crestview include?
AIM starts with the history of the problem, then examines the roofline, windows, plumbing and air conditioning system for the source of moisture. Moisture meters and a thermal camera help locate wet materials that look dry. Air and surface samples go to an independent laboratory, and indoor air results are compared with an outdoor sample taken at the same visit. The written report documents what was found, with photographs.
Does AIM remove or clean up mold?
No. AIM does not do remediation and takes no referral fees. When cleanup is needed, AIM writes a protocol that a contractor you choose can follow, and after the work is finished AIM can return to verify it. Keeping testing separate from cleanup means the person writing the findings has no stake in the size of the job.
How do I find out whether an address near Crestview is in a flood zone?
Flood zones come from FEMA’s flood insurance rate maps, and FEMA lists March 9, 2021 as the current effective date for both Okaloosa County and the City of Crestview. Okaloosa County Growth Management can supply the zone, base flood elevation and floodway details for a property, and its Crestview office is at 812 East James Lee Boulevard, (850) 689-5080. Inside the city, Section 3.04.01 of the Land Development Code provides a Flood Zone Verification Letter, an official statement of the FEMA zone for a property.
Sources: FEMA, Community Status Book, Florida; Okaloosa County, 2025 Flood Protection Information; Okaloosa County Growth Management; City of Crestview, Land Development Code, Section 3.04.01
Who issues permits for repairs after water damage, the city or the county?
Inside Crestview, permits and inspections run through the city’s Community Development Services at 198 Wilson Street North, (850) 682-1560, option 2. In unincorporated areas such as Baker or Milligan, development permits come from the county’s Growth Management department, which asks for proof of ownership. In a mapped flood hazard area, ask the permitting office before repairs begin, because work costing 50% or more of a building’s market value triggers new-construction standards.
Sources: City of Crestview, Community Development Services; Okaloosa County Growth Management; Okaloosa County, 2025 Flood Protection Information; BEBR, Florida Estimates of Population 2025, Table 1 (lists Okaloosa County’s municipalities)
Does a Florida seller have to tell a buyer about past leaks or moisture?
In Johnson v. Davis, decided October 31, 1985, the Florida Supreme Court held that a home seller who knows of facts materially affecting the property’s value, which are not readily observable and not known to the buyer, must disclose them. The sellers in that case knew of roof problems. A written inspection report records conditions on the day of the visit. Whether a seller had a duty to disclose is a legal question for a Florida real estate attorney.
Source: Johnson v. Davis, 480 So. 2d 625 (Fla. 1985), CourtListener
Do storms that come ashore at the coast matter this far inland?
Yes. The National Hurricane Center reported that Hurricane Opal, which came ashore near Pensacola Beach in October 1995, spread wind damage well inland. In April 2014, NWS Mobile listed Okaloosa County among the northwest Florida counties with disastrous flooding after a second round of storms dropped an estimated 10 to 15 inches in about nine hours across the hardest hit area, and its table lists 9.83 inches at Duke Field for April 28 to 30. Wind-driven rain through damaged roofs and rising ground water both carry moisture into buildings.
Sources: National Hurricane Center, Hurricane Opal report; NWS Mobile, April 29 to 30, 2014 historic flash flood event
My Crestview house was built after 2000. Why would it have moisture trouble?
About half of Crestview’s homes were built in 2000 or later, so newer houses are a large part of the local housing stock. Age alone does not decide risk. A slab-on-grade floor can pass ground moisture upward if the soil under it stays wet, a leaking condensate line or supply pipe can soak a floor that cannot dry easily, and a tight house holds humid air if the air conditioner is not removing it. An inspection looks for the actual source.
Source: Census Bureau ACS 2024 5-year, Crestview city, table B25034
Who performs the inspection in Crestview?
Mold assessments in Florida are performed by Lance Bourque, a Florida-licensed mold assessor (DBPR license MRSA5893). You can verify the license at MyFloridaLicense.com.
Which areas around Crestview do you cover?
AIM covers Crestview, Baker, Laurel Hill and Holt in Okaloosa County, Florida. Florida service is mold and indoor air quality only.
Other Florida Areas We Cover
- Pensacola, Perdido Key, Cantonment and Century
- Gulf Breeze, Navarre and Pensacola Beach
- Pace, Milton and Jay
- Fort Walton Beach, Destin and Niceville
- Santa Rosa Beach, Miramar Beach and Walton County
- Panama City, Panama City Beach and Lynn Haven
See the Florida Panhandle overview. Looking for Alabama or Mississippi? See mold inspection in South Alabama and South Mississippi.
Get a Crestview Mold Inspection
Straightforward Pricing
Every inspection is quoted up front.
Call (251) 308-5327 or Request an Inspection